Buick ManageUPS Manuel d'utilisateur télécharger pdf (Page 30)

File Transfers

ManageUPSNET User Instruction Manual 27

NOTE: You may notice that the lines using the

put command have two ﬁle names speciﬁed. The

ﬁrst is the ﬁle to be uploaded the second is the

name it will be given on the server. The second

name must be ﬁrmware.gz for this to work

properly.

open 198.186.180.1 21 #open FTP connection to

ManageUPSnet at

198.186.180.1 port 21

admin #user name

admin #password

put firmware260x.gz firmware.gz #upload the firmware file

to the adapter

disconnect #disconnect from

ManageUPS

open 198.186.180.2 21 #open FTP connection to

ManageUPS at

198.186.180.2 port 21

admin #user name

admin #password

put firmware260x.gz firmware.gz #upload the firmware file

to the adapter

disconnect #disconnect from

ManageUPS

#repeat the above steps for all of the ManageUPS adapter on

your system.

quit #quits the FTP client.

4. Save the script ﬁle to the \Manageupsnet

directory, name the ﬁle “firmware.ftp.”

5. Open a Command Prompt. Change to the

\Manageupsnet directory.

6. You can run the script by typing “ftp.exe

-s:firmware.ftp.” When the script is

done all of the adapters will be updated to

the new ﬁrmware version.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 66 67

Pas de commentaire

Buick ManageUPS Manuel d'utilisateur Page 30