Buick ManageUPS Manuel d'utilisateur télécharger pdf (Page 41)

Appendix A: Conﬁguration File Description

38 ManageUPSNET User Instruction Manual

Appendix A:

Conﬁguration File

Description

The ManageUPSNET conﬁguration ﬁle is an

ASCII text based ﬁle which uses a “parameter =

value” format to describe each entity. This ﬁle

can be uploaded to the adapter using TFTP or

FTP. The table below describes each possible

entity. If an entity is missing from an uploaded

ﬁle then that entity will simply not be updated in

any way.

Table 5. Conﬁguration File Description

Parameter Name Description

The IP address.

The Subnet Mask used.

The Default Route used

bootp

BOOTP enabled ﬂag – determines if BOOTP should be used to

obtain network information at startup time.

0 = disabled

1 = enabled

sysName

The name of the system.

sysLocation

The physical location of this UPS.

sysContact

The name of the person to contact regarding this UPS.

identName

A descriptive name of the UPS.

identAttachedDevices

A description of the devices attached to this UPS.

snmpCommunity0 –

•

snmpCommunity9

10 sets of 3 tuples, separated by semi-colons, specifying the

SNMP communities. These tuples are

• Community Name

• IP Address

• Permissions (READ, WRITE or READ_WRITE)

Inactive community entries should include only the parameter

name and equal sign (i.e.

snmpCommunity9=

snmpTrapDest0

•

snmpTrapDest9

10 sets of 3 tuples, separated by semi-colons, specifying

SNMP trap information. These tuples are

• Trap Community

• Trap Destination Address

Inactive trap entries should include only the parameter name

and equal sign (i.e.

snmpTrapDest9=

)

snmpAuthenticateTraps

A value of 1 enables traps on authentication errors while a

value of 0 disables them.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 66 67

Commentaires sur ces manuels

Pas de commentaire

Buick ManageUPS Manuel d'utilisateur Page 41

Commentaires sur ces manuels