Buick ManageUPS Manuel d'utilisateur télécharger pdf (Page 37)

File Transfers

34 ManageUPSNET User Instruction Manual

Download Files Using Web Browser and

HTTP

1. Ensure that the adapter is attached to the

network and has already been conﬁgured

with an IP address, Subnet Mask and a

Default Gateway. The HTTP server must

also be enabled.

2. Open your browser.

3. Type in the URL of the ﬁle you wish to

download in the address line of the browser

and press [ENTER]. For example, typing

“http://198.186.180.11/

adapter.cfg” on the address line would

download the ManageUPS

NET

conﬁguration ﬁle to the browser.

A complete list of ManageUPS

NET ﬁles can be

found in Appendix C, page 45.

Download Files Using FTP

1. Ensure that the adapter is attached to the

network and has already been conﬁgured

with an IP address, Subnet Mask and a

Default Gateway. The FTP server must also

be enabled.

2. Open a Command Prompt.

3. Open an FTP session by typing “ftp” at the

command line.

4. Connect to the ManageUPS

NET by typing

“open xxx.xxx.xxx.xxx yy” where

“xxx.xxx.xxx.xxx” represents the IP

address of the ManageUPS

NET and “yy”

represents the FTP server port. If the port

was not changed from the default of 21 then

supplying the port in the command line is

optional.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 66 67

Pas de commentaire

Buick ManageUPS Manuel d'utilisateur Page 37