Buick ManageUPS Manuel d'utilisateur télécharger pdf (Page 9)

Installation

6 ManageUPS

NET

User Instruction Manual

4. Refer to speciﬁc instructions provided in the

Accessory Kit.

5. Plug the UPS in and turn it ON.

External Adapter

For applications where the auxiliary

communications slot is unavailable, an external

chassis for the Adapter can be used. Installing

the External ManageUPS

NET

adapter is easy.

Connect the port labeled UPS to the

communications port on your UPS. Connect the

universal external power adapter to an AC

source and connect it to the 5V DC port on the

back of the chassis. Connect the 10Base-T port

to a shielded ethernet LAN segment and the

system is ready to go.

Fig 2. External ManageUPSnet rear

The adapter ships BootP enabled. If your

network does not have a BootP server, you will

need to conﬁgure the adapter using the serial

port labelled “TERM.” Follow the instructions

found in the section Using BOOTP & TFTP on

page 9 for network conﬁguration.

For Out-Of-Band access — after conﬁguration

is complete, you can attach your modem to the

serial port labelled “TERM” using a null

modem adapter.

For a more secure installation,

ManageUPS

NET

’s external chassis ships with

optional wall mount brackets.

DC Input

UPS Port

10Base-T Port

Ethernet Status LEDs

Terminal Port

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 66 67

Commentaires sur ces manuels

Pas de commentaire